Shop
Gates
Close board gates are made on site using only slected scandinavian red wood framing and home grown spruce feather edge.
The framing consits of 100mm x 50mm styles which are morticed to accept 100mm x 38mm ledges and braces.
a standard close board gate is 1750mm x 900mm wide
other sizes are avalible from stock
we can make odd sizes to order quickly
TGV gates make a nice change as they are prepared timber with a smooth finish, ready for which ever treatment you choose to give it.
We manufacture TGV gates on site, selecting only the best Scandinavian timbers, using 100mm x 50mm styles morticed out for 100mm x 38mm ledges then double braced, finished off with 19mm thick tgv.
The Lap Gate is made to suit lap panels. It is of a sandwich design and has double cross bracing for strength.
stock sizes 900mm wide with heights to suit picket panels
any other sizes can be made quickly to your requirement
height of 3'6'' and widths from 3' to 6'
can make other sizes to order
The Argyle Gate is a more competitively priced alternative to the Manor range, while still offering excellent value for money.
This only comes in standard sizes in softwood.
Top of the range entrance gates made in both hard and soft wood.
only two sizes avalible 10' and 12' both 5' high.
sizes range from 5' to 12' wide top bar height of 3' 3.5''
all mells gates are 3' 6'' high
they come in widths ranging from 3' to 6' in both soft and hardwood
The Somerset 5 Bar Field Gate is built with Iroko hardwood for strength, stability and a long life.
sizes range from 3' to 12'
top rail height of 3' 7''